AMF REECE Decostitch, Руководство по эксплуатации и ремонту, Страница: 47 / 118

1-33
S-104-100
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
STOP MOTION ADJUSTMENTS
13. Turn the right hand stop wheel until it locks in place. Turn the left hand crank until the machine is in
home position. A clearance of approximately 0.50 mm (.020”) is required between drive hub
W and left
hand dog X . To adjust, loosen nut GG , move stud HH forward or backward (forward decreases the gap;
backward increases the gap) as necessary. Once the adjustment has been made, re-tighten nut GG .
14. Turn the main power on and cycle the machine to ensure that it is stopping in home position. If it is
not stopping in home position, repeat step 13 to increase or decrease the clearance (increasing the clear-
ance will stop the machine sooner, decreasing the clearance will stop the machine later) as necessary.
15. Once the machine is stopping properly in the home position, continue cycling the machine. This is
done to ensure it is starting as well as stopping correctly and that all adjustment have been done properly.
If the machine is not starting and/or stopping correctly, re-check each step to ensure correct adjustments
have been made.