1-39
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
RACE ADJUSTMENTS
5. Race should have traveled 90 degrees to the bedplate, as shown below. If the race did not travel 90
degrees, perform steps 6 and 7.
6. Place a straight edge across the front of the race and check distance on both sides of the race to the side
of the bedplate.
7. Lift the machine. Loosen allen cap screw
E
and move it either up or down (up moves the race to the
left, down moves the race to the right) as necessary. Once the adjustment has been made, re-tighten screw
E
.