Ametek VERSITRON BT130R Скачать руководство пользователя страница 79

Страница: 79 / 82

Versitron Operation Manual

APPENDIX B: AT130-MT4 (T-Stand) Automatic Head-Height
Adjustment Option

Testers supplied with a motorized head height adjustment option can move the top of
the tester and test head up or down automatically to accommodate testing on parts that
vary greatly in size.

The control box has 4 controls

1. To turn on, turn arrow knob to brake position, plug in the power cord and flip the

ON/OFF toggle switch to ON. The power light will come on.

2. Turn the knob to “Lower” for downward travel, “Raise” for upward travel. Release

knob to stop motion.

3. Place specimen on anvil or anvil stage, and practice clamping the specimen and

unclamping it. Adjust torque and speed settings to desired levels.

4. Avoid running the height all the way up. If it gets stuck at this position, turn torque to

“OFF” and arrow knob to “Forward” to unstick.

CAUTION

The operator must be careful not to pinch his hand

between test head and specimen or anvil. Serious operator injury
may result.

Содержание VERSITRON BT130R



















































































Результаты поиска

Содержание VERSITRON BT130R

Отзывы:

Ametek VERSITRON BT130R, Руководство по эксплуатации, Страница: 79 / 82

Результаты поиска

Содержание VERSITRON BT130R

Отзывы: