manualshive.com logo in svg

Ametek VERSITRON BT130R, Руководство по эксплуатации, Страница: 56 / 82

Поделиться
Скачать
Ametek VERSITRON BT130R Скачать руководство пользователя страница 56

56

  

Versitron Operation Manual

 

 

6.0

 

INDIRECT CALIBRATION 

The Indirect Calibration should not be revised on a routine basis. The process consists 
of three optional indirect calibration levels: 

Machine

 level, 

Indenter

 level and 

Hardness Scale

 level. The 

Machine

 calibration level is the broadest and more 

extensive method as it incorporates both the indenter and the hardness scale 
approaches, it requires a minimum of three different reference blocks per hardness 
scale range and it’s recommended to take a minimum of three readings per reference 
block per indenter type (diamond and ball). The 

Indenter

 calibration level is more 

suitable for applications where the use of different indenters (ball and diamond) is the 
norm. The 

Hardness Scale

 calibration level approach is more practical to applications 

where a specific group of hardness scales is used on a regular basis, it requires a 
minimum of three different reference blocks per hardness scale and it’s recommended 
to take a minimum of three readings per reference block covering all the hardness 
scales intended to be used. 

The Indirect Calibration function can be accessed from the 

Advanced Settings

 screen 

under the 

Technician

 option. This option is password protected and it requires the 

technician to enter the 

Technician

 passcode at the keypad prompt. 

 

 

After a successful entry the technician can select the Indirect Calibration 

Set

 tab to 

access this function, the 

Indirect Calibration

 screen allow the selection of a 

Hardness Scale

 to calibrate.

 

Содержание VERSITRON BT130R



















































































Отзывы:

Нет отзывов