Ametek Thermox TM2000, Руководство пользователя

Страница: 95 / 170

Calibration | 5-3
Overview
The Calibrate key allows you to do the following (see Figure 5-2) :
• Initiate an automatic, remote, or manual calibration or verification.
Although automatic calibrations can be set to run at predetermined
frequencies, you can also force the system into an automatic calibra-
tion (Initiate Cal and Initiate Verify).
• View previously collected calibration or verify data (Cal/Verify Data).
• Define calibration gas values to match known values of calibration gas
cylinders (Cal Gas Value).
• Set the pressure and flow of RCU gases without performing a calibra -
tion or verification (Inject Cal Gas).
• Define cycle times for automatic calibrations or verifications (Set Cal
Timers/Set Auto Timers).
• Set the current date and time (Set Cal Timers/Set Time and Date).
Figure 5-2.
Overview of Calibrate
Key functions.
Calibrate Key Menu Function/Options
initiate cal Start an automatic, remote or manual calibration.
initiate verify Start an automatic, remote or manual verification.
cal/verify data
View latest calibration and verify data.
cal Gas values Enter calibration gas values.
inject cal Gas
Set pressure and flow of RCU gases without
performing a calibration.
Set cal Timers Set control unit time/date
(applies only for auto cal operations
Enable or disable auto cal cycles
with RCU, except for
Set cal gas times for auto cal/verify operations.
setting time and date.)
define recovery durations after a cal/verify.
configure verify Enter verify gas value.
Enter acceptable verify range.