Ametek Sorensen SGI Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 120

background image

Sorensen SGI Series

Operation

M550221-01 Rev U

3-9

3.2

Basic Operation and Output Verification

This section provides an overview and examples of front panel programming,
Default Programming menu operation, and initial functional tests for the SGI
Series power supply.

The SGI Series power supply is shipped from the factory configured for front
panel (local) voltage/current/OVP control, and with the remote sense not
connected (default to internal local voltage sensing at chassis output
terminals). The remote sense leads must be connected externally by the user
to achieved performance specifications. The Analog Control connector is
supplied with a mating connector which has the remote output ON/OFF control
signals jumpered for ON (Pin-5 shorted to Pin-6) in order to allow the output to
be enabled.

WARNING!

The power-up factory default state is output enabled, and the output will
be energized with the settings of voltage and current at zero. At initial
power-on a screen is displayed with a warning that the output will be
enabled after countdown of a 10-second timer; during this state, the
output Voltage and Current are programmed to zero, the Overvoltage
Protection (OVP) is set to maximum, and the Output State is

OFF

. After

the 10-second timer has elapsed, the Output State is changed to

ON.

3.2.1

Initial Setup

Before connecting the unit to the AC mains, ensure that the front panel
ON/OFF power switch is in the

OFF

position. Check the Analog Control (J1)

mating connector on the rear panel to verify that Pins 5 and 6 (Remote Output
On/Off) are shorted together.  This is the default configuration installed from
the factory.  This jumper allows the output of the supply to be enabled from the
front panel when the Output On/Off button is pressed.

3.2.2

Default Programming Menu

The following subsections describe operation in Constant-Voltage Mode,
Constant-Current Mode, and Overvoltage Protection (OVP) using the Default
Programming Menu for input of setpoints.

«
...
55
56
57
58
59
...
»

Содержание Sorensen SGI Series

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Sorensen SGI Series

Бренд: Makita Страницы: 3

Бренд: Makita Страницы: 2

Бренд: Makita Страницы: 3

Бренд: Gallagher Страницы: 39

Бренд: Makita Страницы: 3

Бренд: King Industrial Страницы: 7

Бренд: Total Страницы: 11

Бренд: Xantrex Страницы: 64

Бренд: Sealey Страницы: 3

Бренд: Whyte Страницы: 12

Бренд: Eaton Страницы: 6

Бренд: Hakko Electronics Страницы: 2

Бренд: Energenie Страницы: 45

Бренд: Alcoa Страницы: 22

Бренд: daisalux Страницы: 6

Бренд: Central Machinery Страницы: 15

Бренд: Premier Страницы: 4

Toolson PRO-OF 1255

Бренд: EINHELL Страницы: 268

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды