Ametek Sorensen SGI Series Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 120

background image

Sorensen SGI Series

Operation

M550221-01 Rev U

3-35

screen). Use the NavPad to scroll down to Home Menu
Page 2 (there will be two inter-screen navigation arrows,
one at the top and one at the bottom of the screen). Press
F3, which jumps to the Language Menu, and then use the
NavPad to scroll to the user's native language.

3.8.10

Info

The Supply Information screen shows the date that the unit
was last calibrated, Model Number and Serial Number of
the unit, and version of the software. To access this screen,
from Home Menu Page 2 press F4.

3.8.11

Remote

Remote, F1, provides screens for either the Ethernet option
or the GPIB option, described in the following subsections.

E

THERNET

The Ethernet Remote Menu displays the Ethernet MAC
address of the power supply, which cannot be edited.
Access the menu from Home Menu Page 3, F1 key. This
menu also displays in the IP IN USE: line, the IP address
presently in use from either a static IP setting or from the
DHCP server, depending on how assigned. The Baud Rate
is editable via the NavPad; changing it here changes the
rear panel RS-232 SCPI baud rate. The initial factory setting
is 19200.

LXI

The LXI submenu (F3 from the Remote Menu) displays
two settings required by the LXI requirements.

PING Response:

enables or disables the power supply’s

response to a ping packet sent from a remote Ethernet host. To
change the setting to either ENABLED or DISABLED, move the
editing arrows to the PING Response: line by pressing NavPad
left/right, and then change the setting by pressing NavPad
up/down. Press F1 to Cancel the change and return to the
Remote Menu screen, or press F4 to Save the changed setting.

Identification:

controls the LAN LED on the power supply’s

rear  panel.  ENABLED  causes  the  LAN  LED  to  flash  for  visual
identification.  DISABLED  causes  the  LAN  LED  to  be  steady-lit
to  indicated  the  power  supply’s  connected  status.  To  change
the setting, move the editing arrows to the Identification field by
pressing  NavPad  left/right,  and  then  change  the  setting  by
pressing NavPad up/down. Press F1 to Cancel the change and

«
...
81
82
83
84
85
...
»

Содержание Sorensen SGI Series

























































































































Отзывы:

Нет отзывов

Похожие инструкции для Sorensen SGI Series

Бренд: Laser Страницы: 8

Бренд: Palmgren Страницы: 4

Бренд: Makita Страницы: 16

Бренд: Mitox Страницы: 40

Бренд: Wacker Neuson Страницы: 36

Бренд: Happy Henhouse Страницы: 20

Бренд: Datcon Страницы: 32

Бренд: Hilti Страницы: 191

Бренд: VersaLogic Страницы: 9

Бренд: Grad-M Страницы: 28

Бренд: EKSMA OPTICS Страницы: 13

Бренд: Bosch Страницы: 32

PRIMERGY PG-PU106

Бренд: Fujitsu Страницы: 20

Бренд: Fujitsu Страницы: 29

Бренд: Husqvarna Страницы: 68

Бренд: Husqvarna Страницы: 14

Бренд: Husqvarna Страницы: 20

Бренд: Husqvarna Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды