2
IOM (Safety) -
Installation, Operation and Maintenance
Optical Oxygen Analyzer
Intellectual Property & Copyright Notice
©2021 by Ametek, Barben Analytical (“Owner”), Carson City, NV 89706, U.S.A. All rights reserved.
Copyright is a form of protection grounded in the U.S. Constitution and granted by law for original works of authorship.
Any and all derivatives of, including translations thereof, shall remain the sole property of the Owner, regardless of any circumstances.
Notice: This publication is for information only. The contents are subject to change without notice and should not be construed as a
commitment, representation, warranty, or guarantee of any method, product, or device by Owner.
Inquiries regarding this manual should be addressed to Ametek., Barben Analytical , Technical Support, at the following:
Email:
Revision
Drawing No.
Document Name
Device Serial Numbers
Date
A
1907BA-IOM(safe)
IOM (Safety)
OXYvisor
- BA
1907-00001 to 20F1181
July 31’st, 2019
B
2111BA-IOM(safe)
IOM (Safety)
OXYvisor
- BA
20F1182 to current
November 8th, 2021
Disclaimer
This safety manual which includes installations, operation and maintenance instructions is a guide. The information in this manual has been carefully
checked and is believed to be accurate for the intended use of this analyzer. However, Barben Analytical assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Barben Analytical be liable for direct, indirect, incidental, special or consequential damages
resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Barben Analytical reserves the right to make
improvements in this manual and to the products it describes at any time, without notice or obligation.
Document Revision Table
Table of Contents
Intellectual Property & Copyright Notice
Section 1 - General Information & Safety
1.1 Introduction - Purpose of this Manual
������������������������������������������������������������������������������������������������ 5
������������������������������������������������������������������������������������ 5
1.4.3 General Installation Precautions
1.5 Environmental Information (WEEE)
Section 2 - Technical Product Specifications - RATINGS
- BOA Oxygen Analyzer Specifications
��������������������������������������������������������������������������� 7
2.2 BOS Sensor Overview (determines operating range for
����������������������������������������������� 7
Configuration - Product Model Selection
���������������������������������������������������������������������� 7
2.5 General principle of operation
Analyzer Features (Hardware/Firmware/Software)
������������������������������������������������������ 8
2.7 Hazardous Area Agency Certification & Markings - [Recapitulation]
��������������������������������������������������� 9
2.7.1 Zone 1 Group IIC with Specific Conditions of Use
������������������������������������������������������������������������������������������9
2.7.2 Zone 2 Group IIC with Specific Conditions of Use
������������������������������������������������������������������������������������������9
2.7.3 Class I, Division 2 Groups A,B,C, & D