Ametek 241CE II, Руководство пользователя

Страница: 65 / 171

PN 903-8797, Rev A
Analyzer Configuration
EEPROM Data Sheets and Dewpoint Monitor Data Sheets which list the factory
default configuration settings of all programmable parameters are located in
the analyzer Documentation Package folder shipped with the analyzer.
IMPORTANT
Keep these forms in a safe place and record any changes you make
to the original factory settings for later reference. If the EEPROM is
replaced, this data must be re-entered in order to override the factory
defaults.
The analyzer’s serial number, firmware version, and operating voltage can-
not be set or changed in the field. If necessary, see the original configuration
sheets to revert the analyzer back to its original settings.
The 241CE II Analyzer is pre-configured at the factory, according to
predetermined and agreed upon customer requirements. However, if
changes are required, most parameters can be changed. See Chap-
ter 3 for more information about navigating through the menus from
the User Interface.
Installation and Start-Up
|
2-41