manualshive.com logo in svg

Amersham Pharmacia Biotech AKTA design pH/C-900, Руководство пользователя

Поделиться
Скачать
Amersham Pharmacia Biotech AKTA design pH/C-900 Скачать руководство пользователя страница 25

B

Menus

B.1 Check menu

B.1.1 Check Monitor Cell and Electrode

A check of the conductivity cell and pH electrode can be performed.

1 Select main menu 

Check

, press OK.

2 Select sub menu 

CheckMonitor cell and Electrode

, press OK.

3 The text 

Passed

will appear for 2 seconds if the cell and electrode

are indicating reasonable values. If there are any problems an
error message will appear.

B.1.2 Check Service Mode

Service information relevant to the instrument can be checked.
Information may not be available in all menus.

1 Select main menu 

Check

, press OK.

2 Select sub menu 

Check Service Mode

, press OK.

3 The service telephone number is displayed, press OK.

4 The service contract number is displayed, press OK.

5 The instrument serial number is displayed, press OK.

6 The instrument name and software version are displayed, press

OK.

7 The date of the last service is displayed, press OK.

8 A test of the instrument buzzer is performed, press OK.

B.2 Setup menu

B.2.1 Setting up conductivity temperature compensation

The conductivity in a buffer is temperature dependent. To relate
conductivity to concentration and/or compare conductivity values,
temperature compensation should be used. The compensation
consists of a compensation factor together with a reference
temperature. All conductivity values will then automatically be
converted to the set reference temperature.

1 Select main menu 

Setup

, press OK.

2 Select sub menu 

Setup Conductivity

, press OK. 

3 Select sub menu 

Setup Cond Temp Comp

, press OK.

4 Set a temperature compensation factor, press OK. 

Monitor pH/C-900
User Manual 18-1120-06 Edition AC

21

Setup Conductivity

Setup Cond Temp Comp
(2.0%/°C)

2.0

Check Service Mode

Telephone Service
012345678901

Contract Number
012345678901

Buzzer Test

Date of Maintenance

?

Monitor pH/C-900
V1.00

Serial Number
01234567 YM 012345

Check Monitor Cell
and Electrode

Setup Cond Ref Temp
(22.3°C)

Reference information 

B

18-1120-06_AC.qxd  1999-04-14 14:16  Sida 21 (1,1)

Содержание AKTA design pH/C-900









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды