20
F/C Settings
The F/C Settings screen is use to select the temperature display mode.
Fahrenheit (F) or Celsius (C) are the two available modes.
Change the Temperature Mode
1. Press the
MENU button.
2. Scroll to
User Settings and press the Select button.
3. Scroll to
F/C Settings and press the Select button.
4. Press the plus (
+) or minus (-) buttons to change the temperature
mode. Select F for Fahrenheit or C for Celsius.
Internal Sensor Calibration
The Sensor Calibration screen is used to change the temperature
calibration of the internal temperature sensor. The temperature calibration
can be changed by +/- 7 degrees.
When the Sensor Calibration screen is selected, the current temperature
calibration is displayed. In the example screen, the calibrated temperature
is 77 and the number of degrees of offset being applied is 1.
Change the Sensor Calibration
1. Press the
MENU button.
2. Scroll to
User Settings and press the Select button.
3. Scroll to
Sensor Calibration and press the Select button.
4. Press the plus (
+) or minus (-) buttons to change the sensor
calibration.
Î
After this screen is closed, it may take a few seconds for
the temperature displayed on the main thermostat screen to
update to the new temperature.
Usage Graph
The Usage Graph shows daily heating and cooling runtime hours for a
week.
The button in the lower right corner will change depending on what is
being displayed. When the heating time is displayed, the button will read
Cool. When the cooling time is displayed, the button will read Heat Press
the
Heat/Cool button to display the heating/cooling time.
F/C Settings
F/C Mode
F
Done
+
-
Sensor Calibration
Internal (77) 1
Done
+
-
Heating time (Hrs)
Done
Cool
20
15
10
5
Sun
Mon
Tue Wed Thu Fri
Sat
