18
Filter Service
The Filter Service screen will show the accumulated Runtime hours as well
as the Service Interval that will be used to trigger a Filter Message. Any
type of HVAC operation that causes the HVAC system fan to run will cause
the Filter Runtime value to increase.
When the Runtime hours equals the Service Interval hours, a “Filter”
message to remind you to replace the filter. Once the filter has been
replaced, press the Reset button to reset the Filter Runtime value to zero.
Filter Settings
1. Press the
MENU button.
2. Scroll to
User Settings and press the Select button.
3. Scroll to
Filter Service and press the Select button.
4. Make choice from the following options A-C:
A. To View/Reset Filter Runtime
5. The Filter Runtime is displayed in hours.
6. To reset the Filter Runtime counter, press the
Reset button.
Î
The Filter Runtime counter should be reset each time the filter is changed.
B. Change the Filter Service Interval
7. Press the plus (
+) or minus (-) buttons to adjust the service interval.
Î
The service interval can be set between 100 and 4000 hours in 100 hour increments.
C. Disable the Filter Service Interval
When the filter service interval is disabled, the runtime counter will continue to count the runtime, but the filter service indicator will never be
displayed..
8. Press the minus (
-) button until Disabled is displayed
Filter Service
Done
Reset
Filter Runtime
184 HRS
Service Interval
300 HRS
+
-
User Settings
