American Musical ReMOTE SL, Руководство пользователя

Страница: 30 / 60

6. GLOBAL Mode
GLOBAL Mode allows all the universal ReMOTE SL settings to be configured, which will affect every Template. There are two GLOBAL Edit
pages, accessed by alternate presses of the GLOBAL button. The first press opens up a screen where the screen contrast can be edited:
Use the vertical columns of controls (knobs or buttons) underneath the Left Contrast and Right Contrast options to set the contrast for
either screen. You will see each screen change as the value is adjusted.
Press either of the SCROLL UP buttons to access the second screen; GLOBAL Parameter Edit:
The options are as follows:
Mem Prot (Memory Protect): With this option set to ON, none of the ReMOTE SL settings can be overwritten. Set this to OFF if wishing
to edit and then save Templates or create your own, or modify the GLOBAL settings.
USBa To : This option routes the MIDI data received from the computer at the first USB port (listed as SL In 1 in the MIDI Output selection
of the sequencer). The choices are OFF or either or both of the SL MIDI Outputs (M1 and M2).
USBb To : This option routes the MIDI data received from the computer at the second USB port (listed as SL In 2 in the MIDI Output
selection of the sequencer). The choices are OFF or either or both of the SL MIDI Outputs (M1 and M2).
MIDI To : This option sets the routing for MIDI data received at the SL MIDI Input on the rear panel. The routing options are the same as
the first 12 options for Port routing of individual controls in EDIT Mode (see section 5. 1. 1).
Pot Mode : This option provides a universal setting for all pots, encoders and sliders set to GLOBAL. Set it to either JUMP or PICK-UP as
required (see section 5. 1. 13 for a description of these responses).
DispTime (Display Timeout): Set the length of time that screens display temporary values here to a value of between 0 and 1260ms, or
to PERM (permanent).
KeepVals (Keep Values): With this set to OFF, the SL will take the values for a newly selected Template from those stored in memory.
With this set to ON, the values will be taken from whatever positions the SL controls are in when the Template is selected.
Midi Clk (MIDI Clock): This option defines the MIDI Clock source. The choices are AUTO (automatic sensing of a MIDI Clock source),
INTERNAL (the SL’s MIDI Clock), EXT-AUTO (automatic sensing of an external MIDI Clock), USBa or USBb (MIDI Clock received at either
of the two first SL USB MIDI inputs) or MIDI In (MIDI Clock received at the SL MIDI In on the rear panel).
Left Contrast
5
Right Contrast
5
Mem Prot
OFF
USBa To
M1
USBb To
M2
Midi InTo
|Ua M1 M2
Pot Mode
PICK-UP
DispTime
250 MS
KeepVals
OFF
Midi Clk
INTERNAL