American Musical ReMOTE SL, Руководство пользователя

Страница: 18 / 60

5. 1. 1 Template Parameter Edit 1 Page – CC Messages (all controls)
The options from left to right, after Control type (CC) are:
DispType (Display Type): This option chooses the way in which data is displayed for the control. The options are 0 - 127 and -64 to +63.
For example, if wanting to assign the volume of a track to a pot then 0-127 would be preferable, whereas the pan would suit -64 to +63.
Low Val (Low Value): This option sets the lower limit of the control, which will often be 0 or -64 but in the case of wanting to set a control
to vary from 20 to 30, it would be 20. The values on offer here will be in the range set in DispType. It is possible to reverse the action of
a control by setting a low value that’s higher than the High Val.
High Val (High Value): This option sets the upper limit of the control, which will often be 127 or 63 but in the case of wanting to set a
control to vary from 20 to 30, it would be 30. The values on offer here will be in the range set in DispType. It is possible to reverse the
action of a control by setting a high value that’s lower than the Low Val.
Ports : This option sets the port that the MIDI data for that control is sent out of. There are several options here:
OFF – MIDI data is not transmitted
Ua – Sent to USB Port 1 (SL In 1)
Ub – Sent to USB Port 2 (SL In 2)
M1 – Sent to SL MIDI Port 1 Out
M2 – Sent to SL MIDI Port 2 Out
Ua M – Sent to USB Port 1 (SL In 1) and MIDI Port 1 Out
Ub M1 – Sent to USB Port 2 (SL In 2) and MIDI Port 1 Out
Ua M2 – Sent to USB Port 1 (SL In 1) and MIDI Port 2 Out
Ub M2 – Sent to USB Port 2 (SL In 2) and MIDI Port 2 Out
M1 M2 – Sent to both MIDI Port 1 Out and MIDI Port 2 Out
Ua M1 M2 – Sent to USB Port 1 (SL In 1) and both MIDI Port 1 Out and MIDI Port 2 Out
Ub M1 M2 – Sent to USB Port 2 (SL In 2) and both MIDI Port 1 Out and MIDI Port 2 Out
KeybPORT – Sent to the Keyboard Port (set in TEMPLATE Mode; the Template Common Parameter Edit Menu)*
ComnPORT – Sent to the Common Port (set in TEMPLATE Mode; the Template Common Parameter Edit Menu)*
* The KEYBOARD and COMMON (KeybPORT and ComnPORT) routing options mean that there are two choices of global routing
within a Template. This way, groups of multiple controls within a Template can be routed the same way. This is normally preferable,
unless constructing a Template that controls several different MIDI destinations simultaneously. As such, most controls within factory preset
Templates are set to ComnPORT.
MidiChan (MIDI channel): This option sets the MIDI channel on which the data will be transmitted. This can be set to an individual value
between 1 and 16, or to KeybCHAN or ComnCHAN. These last two options mean that there are two choices of global MIDI channel
settings within a Template. This way, groups of multiple controls within a Template can be routed the same way. This is normally preferable,
unless constructing a Template that controls several different MIDI destinations simultaneously. As such, most controls within factory preset
Templates are set to ComnCHAN.
CC Num (CC Number): This sets the value of the CC Number for the control to a value between 0 and 127. If wanting to view the
CC Num in hexidecimal then press the top ROW SELECT on the left. Pressing the same button again will switch back to standard decimal
display. The display type that is selected here (decimal/hexidecimal) will be carried through into the second control display page in PLAY
Mode, accessed by pressing either of the SCROLL UP buttons.
Control
CC
DispType
0-127
Low Val
0
High Val
|127
Ports
ComnPORT
MidiChan
ComnCHAN
CC Num
0