Super Voyager PCI-II 486 ISA Motherboard User's Guide
59
A
Upgrading Cache Memory
L2 secondary (external) cache memory on the American Megatrends Super Voyager PCI-II 486 ISA motherboard can be
upgraded from 128 KB to 256 KB by adding four 32 KB x 8 15 ns SRAMs.
You must use 5 V SRAM DIPs.
Recommended Parts
Manufacturers of the 32 KB x 8 15 ns 5 V SRAMs are:
Manufacturer
Part Number
Paradigm
PDM41256SA15P
Samsung
KM68257BP-15
Motorola
MCM6206CP15
Upgrading Cache Memory
Step
Action
1
Turn the system off. If the motherboard is already installed in a
computer case, remove the cover and expose the motherboard.
2
Make sure you are properly grounded to prevent electrostatic
discharge.
3
Install the new 32 KB x 8 5V SRAM DIPs in sockets U27, U30,
U35, and U38. Make sure that Pin 1 of the sockets matches Pin 1
of the SRAM DIPs.
4
Place a shorting brideg (Jumper) on Pins 2-3 on J42, J44, and J45
on the motherboard.
5
Reinstall the motherboard and turn system power on.
6
The system BIOS should report 256 KB of secondary cache
memory now after the computer boots. If it does not, repeat the
cache memory installation procedure above.
Содержание Super Voyager PCI-II
