American-Lincoln 6150 Скачать руководство пользователя страница 9

Страница: 9 / 138

American-Lincoln

FORM NO. 56041704 - 9

6150

WARNING

Be careful when operating the machine on a ramp or incline. Always move slowly on a ramp. Do not turn this

machine on a ramp. Do not stop and leave this machine on a ramp.

WARNING

Stop and leave this machine on a level surface. When you stop the machine, put the power switch in the “OFF”

position and Engage the parking brake.

WARNING

To prevent injury, and damage to the machine, do not lift the machine or move it to an edge of a stair or loading

dock.

WARNING

Lead acid batteries generate gases which can cause an explosion. Keep sparks and fl ames away from batteries.

NO SMOKING. Charge batteries only in area with good ventilation.

WARNING

Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put

tools or other metal objects across the battery terminals, or the tops of batteries.

WARNING

Maintenance and repairs must be done by authorized personnel only. Tighten all fasteners. Keep adjustments

according to the specifi cations given in the service manual for the machine. Keep the electrical parts of the

machine dry. For storage, keep the machine in a building.

WARNING

Make sure that all labels, decals, warnings, cautions and instructions are fastened to the machine. Get new labels

and decals from American Lincoln.

WARNING

To maintain stability of this sweeper in normal operation, the counterweights, over-head guard, rear bumper

guard or any similar equipment installed by the manufacturer as original equipment, should never be removed. If

it becomes necessary to remove such equipment for repair or maintenance. This equipment must be reinstalled

before the sweeper is placed back in operation.

WARNING

The hopper could lower unexpectedly and cause personal injury. Engage the hopper safety arm before working

under the hopper.

SAFETY PRECAUTIONS

Содержание 6150











































































































































Результаты поиска

Содержание 6150

Отзывы:

Похожие инструкции для 6150

Бренды по названию

Популярные бренды

American-Lincoln 6150, Инструкция по эксплуатации

Результаты поиска

Содержание 6150

Отзывы:

Похожие инструкции для 6150

Бренды по названию

Популярные бренды