American-Lincoln 6150, Инструкция по эксплуатации

Страница: 14 / 138

14 - FORM NO. 56041704 American-Lincoln
6150
SEAT POSITION ADJUSTMENT
The seat adjustment lever is located on the right side of
the seat base. The lever is spring loaded to the “LOCK”
position.
To adjust the seat, push “FORWARD” on the lever and
move seat to desired position then release the lever to
“LOCK” the seat in place.
TURN SIGNALS - 4 WAY (OPTION)
The turn signal switch is located on the steering column
and functions the same as a typical automotive turn
signal. The operator must return the lever to the centered
position after the turn has been completed.
-To signal a right hand turn, move the lever to the “FOR-
WARD” position.
-To signal a left hand turn, move the lever to the “BACK-
WARD” position.
-To use the 4-way Flashers pull out on the turn signal
lever.
BACK UP ALARM (OPTION)
The backup alarm is activated by a switch in the foot
pedal and automatically emits a loud audible noise when
the machine is driven in reverse.
BATTERY CONDITION METER (Battery Power Only)
The battery condition meter is located on the right side
of the instrument panel. The condition meter indicates
the level of charge in the batteries. The batteries are
suffi ciently charges when the needle stays in the green
area on the gauge while the machine is being operated.
Charge the batteries when the needle drops into the red
zone while operating the machine,
Do not operate the machine if the needle stays in the red
zone. Operating the sweeper with discharges batteries
with degrade battery life.
SEAT
POSITION
ADJUSTMENT
LEVER
TO ADJUST
TO
LOCK
C 0714
C-0718
LIGHTS
WORK
LIGHT
GLOW
PLUG
HOURS
0 0 0 0 0
1/10
0
1/2
4/4
FUEL
American-Lincoln
TURN SIGNAL
SWITCH
4-WAY FLASHER
SWITCH
TO SIGNAL
LEFT TURN
TO TURN
ON 4-WAY
FLASHER
TO SIGNAL
RIGHT TURN
C-0715
C0714 FIGURE 9
C0715 FIGURE 10
C0718 FIGURE 11
SWEEPER CONTROLS/INSTRUMENTS