SINGLE BAY SYSTEMS
Single bay systems can consist of 56 cameras and 2 monitors,
48 cameras and 4 monitors, 40 cameras and 6 monitors, or 32
cameras and 8 monitors. A complete system is supplied in one
AD1651B bay.
Installed modules include:
One AD1603N Power Supply Module (PSM),
One AD1661B Central Processing Module (CPM),
One to seven AD1611 Video Input Modules (VIMs),
One to four AD1626 Video Output Modules (VOMs).
For illustration of a typical single bay system, see Page C-8 of
the Typical System Connections.
IDENTIFY THESE MODULES CAREFULLY
BEFORE PROCEEDING.
Power/Data Interconnections
Single bay systems require no power interconnections. All
power to the bay and to all modules in the bay is supplied from
the AD1603N PSM within the bay.
Control Code Connections
Control Code for all camera receivers in a system is provided
from the J1 OUT connector on the AD1603N PSM Power
Panel.
Video Input Connections
Each AD1611 VIM includes eight terminated BNC’s on the
back panel for video input connections. The system assigns
the video input connected to the top BNC on the right-most
AD1611 VIM as input video number 1, and the video input
connected to the top BNC on the next AD1611 VIM to the left
as input video number 9, etc., up to video input number 56 on
the bottom BNC of the last (seventh) AD1611 VIM on the left.
Video Output Connections
Each AD1626 VOM has two BNC’s on the bottom of the back
panel (labeled OUT) for video output connections. The system
assigns the upper right OUT BNC, on the right-most AD1626
VOM, as video output number 1, and the lower left OUT BNC
on this VOM as video output number 2. The upper right OUT
BNC on the next AD1626 VOM to the left is assigned as video
output number 3, etc., up to video output number 8 for four
VOMs.
The four top-most BNC’s on each VOM, labeled A and B, are
not used in single bay configurations.
AD1650B
SYSTEM CONFIGURATIONS
3-3
