Terminating Video Input Module - AD1611
The AD1611 Video Input Module (VIM) performs the actual
video switching in the AD1650B switching bays. Each
module can switch any one of eight video inputs to any video
output, or multiple combinations of video outputs, up to eight.
The eight video inputs to the module are connected at the rear
panel BNC connectors, as shown below. The connectors are
labeled with the appropriate video input number assigned by
the switching system: 1 through 8, 9 through 16, and so on up
to 121 through 128.
The switched video outputs are routed to the Video Output
Modules and the VIP panel within the bay.
Looping Video Input Module - AD1609CM
The AD1609CM Video Input Module performs video
switching in the AD1650B switching bay, similar to the
AD1611 VIM. Each module can switch any one of eight video
inputs to any video output, or multiple combinations of video
outputs, up to eight. The AD1609CM provides additional
looping output BNC connectors for each video input, for
routing the unswitched camera video inputs to additional bays.
Video Output Module - AD1626
The AD1626 Video Output Module (VOM) creates titles that
are added to the monitor video output. Each module controls
the output for two system monitors, as labeled at the top of the
AD1626 VOM rear panel. The modules are labeled with the
appropriate video output number assigned by the switching
system: 1 and 2, 3 and 4, and so on up to 15 and 16. The
module has two video output BNC connectors on the bottom of
the rear panel, labeled OUT, for connection to the two
monitors. Four video input BNC connectors are provided for
switched inputs from other bays, two inputs for each monitor,
labeled A and B.
Model AD1626NA Video Output Module is available with no
text on the outputs. The rear panel of both models is the same,
as shown below.
Video Interconnect Panel
In multiple bay systems, the Video Interconnect Panel (VIP) is
used to distribute the switched video signals from the Video
Input Modules in one bay to the Video Output Modules in
other bays. Eight video output BNC connectors are provided
on the rear panel, as shown below. The connectors are labeled
with the appropriate video output number assigned by the
switching system: 1 through 8 or 9 through 16.
AD1650B
MODULE DESCRIPTIONS
3
C
A
M
E
R
A
1
4
8
5
MONITOR
2
1
O
U
T
A
A
B
B
O
U
T
V
I
P
1
2
3
4
5
6
7
8
8
1
