POWERING UP
A complete AD1650B system may be brought on-line after:
• All modules and bays have been installed and connected.
• One or more cameras have been connected for video input.
• One or more monitors have been connected for viewing
video output.
• All video cables have been properly terminated.
• A Keyboard has been connected for system control.
Power is connected and applied to the AD1650B system one
bay at a time, in the following order:
1. AD1658 bay, if present
2. AD1657 bay, if present
3. AD1655 bay, if present
4. AD1651B or AD1653B bay, whichever is present.
(AD1654 and AD1656 bays are powered by other bays in the
system.)
Powering the AD1650B bays
Power is supplied to each AD1650B bay which contains an
AD1603N Power Supply Module, via a power cord and plug.
Connect the power cord to the required voltage source:
AD1650B - 120VAC, 50/60 Hz
ADE1650B, ADK1650B - 230 VAC, 50 Hz
Each AD1650B bay which contains an AD1603N PSM is
powered on by the toggle switch located on the bottom right of
the front panel (see Figure 4-1, below). When power is turned
on, a red indicator, next to the power switch, is illuminated.
Any bay which does not contain an AD1603N PSM, such as an
AD1654 or AD1656 bay, is powered by the bay that it is
connected to (by the Power/Data Interconnection).
Operating Indication
Following power on to the bay containing the AD1661B or
AD1663B Central Processing Module (CPM), proper
operation can be visually verified when the front panel is
removed from the bay. An LED/RESET indicator located on
the front of the CPM module, shown in Figure 4-2, is the
operating indicator. When power is applied, this LED blinks at
the rate of once per second to indicate proper CPM operation.
If the LED does not blink properly, try a Reset (below).
CPM Reset
If proper operation is not indicated, the CPM may be reset
while the front panel of the AD1650B bay is open. To reset
the CPM, press the LED/RESET button on the front of the
module (see Figure 4-2).
If the CPM still does not indicate proper operation, contact
American Dynamics Technical Support Center for assistance.
4-2
ON
OFF
MICROPOWER CONTROL SYSTEM
Figure 4-1 - AD1650B Bay Front Panel (bays with an AD1603N PSM)
Figure 4-2 - Central Processing Module Front Panel
RESET BUTTON
BLINKING LED
Ribbon Cable to DATA OUTPUT PANEL
for multiple bay interconnect
(1663B CPM models only)
Ribbon Cable from POWER SUPPLY
for RS-232 Inputs
OPERATION
AD1650B
