American Dryer Corp. ML-75HS Скачать руководство пользователя страница 47

Страница: 47 / 56

2. Each part

must be

tagged with the following information:

Model number

and

serial number

of the dryer from which part was removed.

b. Nature of failure (be specific).

c. Date of dryer installation.

d. Date of part failure.

e. Specify whether the part(s) being returned is for a replacement, a credit, or a refund.

NOTE:

If a part is marked for a credit or a refund, the invoice number covering the purchase of

the replacement part

must be

provided.

NOTE

: Warranty tags

(ADC

Part No. 450064) are available at "no charge" from

ADC

upon

request.

3. The company returning the part(s) must clearly note the complete company name and address on the

outside of the package.

ALL

returns

must be

properly packaged to insure that they are not damaged in transit.

Damage claims

are the responsibility of the shipper.

IMPORTANT:

No replacements, credits or refunds will be issued for merchandise damaged in

transit.

ALL

returns

should be

shipped to the

ADC

factory in such a manner that they are insured and a proof of

delivery can be obtained by the sender.

Shipping charges are not the responsibility of ADC. ALL returns should be "prepaid" to the

factory. Any "C.O.D." or "COLLECT" returns will not be accepted.

IMPORTANT:

No replacements, credits, or refunds will be issued if the claim

cannot

processed due to insufficient information. The party filing the claim will be

notified in writing, either by "FAX" or "CERTIFIED MAIL - Return Receipt

Requested", as to the information necessary to process claim. If a reply is not

received by the

ADC

Warranty Department within thirty (30) days from the

FAX/letter date, then no replacement, credit, or refund will be issued, and the

merchandise

will be

discarded.

Содержание ML-75HS

























































Результаты поиска

Содержание ML-75HS

Отзывы:

American Dryer Corp. ML-75HS, Руководство по установке, Страница: 47 / 56

Результаты поиска

Содержание ML-75HS

Отзывы: