95
•
Hard Drive List:
This shows what hard drives are currently connected to the DVR, and
displays information about them.
o
Device Name: This column shows the names of the connected hard disk drives (HDD).
o
Type: This column shows the type of access the DVR has to the hard drive. To change a hard
drive’s type, click the downward arrow next to the HDD’s type and select the desired type.
There are 3 possible settings:
▪
Read-Only: This allows the DVR to read the data, but not modify it in anyway.
▪
Write-Only: This allows the DVR to write data to the HDD, but not read any data from
it.
▪
Read/Write: This allows the DVR to both read and write data on the HDD.
o
Status:
This column shows the status of the connected hard drive. There are 3 statuses:
▪
Normal: This means the hard drive is operating normally.
▪
Error: This means the DVR is experiencing an error when attempting to access the
hard drive.
▪
Disconnected: This means that the HDD has disconnected from the DVR.
o
Free Space/Total Space: This field shows the free space on the hard drive compared to its total
capacity.
To refresh the hard drive list, click Refresh near the bottom left hand corner. To format a hard drive, select a hard
drive to format from the list, and then click Format near the bottom left hand corner. To confirm settings, click
the OK button near the bottom right hand corner. To cancel any modifications, click the Cancel button near the
bottom right hand corner. To apply the settings, click the Apply button near the bottom right hand corner.
4.10.4.4 Record
This screen allows the user to specify which channels can record and take snapshots. The settings on this screen
supersede all others when it comes to allowing channels the ability to record information. Below is a screenshot
of the Record screen:
