66
Below is an explanation of the fields on the P2P settings screen:
•
Enable: This checkbox allows the user to enable the P2P feature for the DVR.
•
Connect Status: This field shows the status of the P2P connection. Once connected using the app, this field should
display the word Online
•
SN: This is an alternate string of characters used to denote the QR code in case the QR code scanner isn't working.
•
QR Code: This is the unique QR code used to help the app user connect to the DVR.
o
Note: The physical
design of the QR code may change based on the network settings used. All QR code connections should be made
with the image that displays on this screen, and not through any static saved images.
•
To confirm settings, click the Save button. To refresh the page, click the Refresh button. To revert to default
settings, click the Default button. To confirm settings, click the Save button.
To confirm settings, click the Save button. To refresh the page, click the Refresh button.
4.10.2.3 Connection
This screen allows users to configure port connections. It is important that the system is rebooted if any
changes are made to the settings on this screen. Also, ensure that port values do not conflict. Below is a
screenshot of the connection screen:
Below is an explanation of the fields on the Connection settings screen:
•
Maximum Connection: This field represents the maximum number of users that can be connected to the DVR at
the same time. The maximum number of users the DVR can support at one time is 128.
•
TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is 37777.
•
UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is 37778.
•
HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value is 80.
•
HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The default
value is 443.
•
RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value is 554.
To revert to default settings, click the Default button near the bottom left hand corner. To copy settings to another
channel, click the Copy button near the bottom right hand corner. To confirm settings, click the Save button near
the bottom right hand corner. To cancel any modifications, click the Cancel button near the bottom right hand
