73
o
Unknown: This means that UPnP is offline.
o
Successful: This means that UPnP is working.
•
Router LAN IP: This field allows the user to enter the IP address of the router that the DVR is trying to
connect to.
•
WAN IP: This field is where the DVR Wide Area Network (WAN) IP is populated. This IP address is what is
used to remotely access the DVR through web access.
PAT Table: This table is used to show how the ports for each protocol listed below have been remapped
by the UPnP protocol.
o
The first column shows the order of the services.
o
The second column shows the name of the
services. To edit this, double click on the service line item.
o
The third column shows the name of the protocol used by that service. To edit this, double click
on the service line item.
o
The fourth column shows the Internal Port used by that service. To edit this, double click on the
service line item.
o
The fifth column shows the External Port used by that service. To edit
this, double click on the service line item.
To revert to default settings, click the Default button near the bottom left hand corner. To add a service to the list,
click Add Service near the bottom left hand corner. To delete a service, click Delete near the bottom left hand
corner. To confirm settings, click the OK button near the bottom right hand corner. To cancel any modifications,
click the Cancel button near the bottom right hand corner. To apply the settings, click the Apply button near the
bottom right hand corner.
To view a video on how to remotely access your DVR using UPnP, go to
http://amcrest.com/videos
and view the video titled “How to Gain Remote Access to Your HDCVI DVR with Univer
sal Plug and
Play”.
To view more information on how to set up the HDCVI DVR for remote access using UPnP, see section 5.2.1.
