37
The following chart shows which settings can be configured by Color Settings:
Item
Note
Period
There are two periods in one day. You can set different sharpness,
brightness, and contrast setup for different periods.
Effective Time
Check the box here to enable this function and then set the period time.
Sharpness
The value here is used to adjust the sharpness of the video. The value
ranges from 0 to 100. The larger the value is, the clearer the edges are
and vice versa. Note: The higher the value, the higher likelihood of
picture noise occurring. The default value is 50 and the recommended
value ranges from 40 to 60.
Brightness
This is used to adjust monitor window brightness. The value ranges
from 0 to 100. The default value is 50.
The larger the number, the brighter the video is. When you input the
value here, the bright section and the dark section of the video will be
adjusted accordingly. You can use this function when the whole video is
too dark or too bright. Please note the video may become hazy if the
value is too high. The recommended value ranges from 40 to 60.
Contrast
This is used to adjust monitor window contrast. The value ranges from 0
to 100. The default value is 50.
The larger the number, the higher the contrast is. You can use this
function when the whole video brightness is OK but the contrast is not
correct. Please note the video may become hazy if the value is too low.
If this value is too high, the dark section may lack brightness while the
bright section may over expose the picture. The recommended value
ranges from 40 to 60.
Saturation
This is used to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50.
The larger the number, the strong the color is. This value has no effect
on the general brightness of the whole video. The video color may
become too strong if the value is too high. For the grey part of the
video, the distortion may occur if the white balance is not accurate.
Please note the video may not be clear if the value is too low. The
recommended value ranges from 40 to 60.
Gain
The gain adjust is to set the gain value. The default value may vary due
to different device models. The smaller the value, the lower the noise,
but brightness is also affected and may be too low in dark
environments. This setting can enhance the video brightness if the value
is high, and it may cause the picture noise level to rise to high levels.
Color Mode
It includes several modes such as standard, color, bright, and gentle.
Select a color mode, the sharpness, brightness, contrast, etc. and it will
automatically switch to the corresponding setup.
