Ambirad AIRBLOC ACR Series, Инструкция по эксплуатации, Страница: 40 / 44

40
If you have previously pressed the button, setting
‘A’ will appear.
This setting will enable the Auto Mode. (Range: On/Off)
To alter the setting, press the button then the
or buttons to increase/decrease the desired
setting.
Press the button to confirm new value. The Auto
Mode display will remain until cancelled by following
this procedure in reverse.
10.3.2 Door Switch Mode
The controller can be set to a preset fan speed when
the door opens. This function can only when used in
conjunction with a door switch.
To access the engineers setting, first ensure that the
display is in the (F) FAN parameter. Press and hold
the b button for 5 seconds. Setting ‘d’ will appear.
The air curtain operates as normal under the program
of the Fan and Heat settings. As the door opens the air
curtain changes state to the settings preset in this
mode. As the door closes, the air curtain returns to
normal. (Range: 1: slow ; 2: medium or 3: fast speed. 0
setting denotes the unit is OFF.)
To alter the setting, press the button then the
or buttons to increase/decrease the desired
setting.
Press the button to confirm new setting. A delay of
2 seconds will return to the original display.