Ambirad AIRBLOC ACR Series, Инструкция по эксплуатации, Страница: 36 / 44

36
9.2.1 Rotor and motor replacement SE
Step 1 Using a pozidrive screwdriver remove the
M5 screws at the side of the grille. Access to the
inside of the air curtain grille can be made. Open
the grille. The grille is hinged to prevent the inner
frame from dropping.
Step 2
Remove fastening holding rotor support bracket
Step 3
Move rotor support bracket towards outside of
case.
Step 4
Disengage rotor bearing.
Step 5
Disconnect rotor from motor shaft.
Step 6
Ensure on replacement of rotor that the flat on the
rotor bearing aligns with the flat on the motor shaft.
Step 7
Disconnect motor facing clips (2) using a large
screwdriver and exerting downward pressure. A
sharp tap can help in releasing the clip. Disconnect
the wires from the motor to the mains terminal rail.
motor .
Replace motor in reverse order.
Carefully close the grille and refit the fixing screw.
Test product as shown in the User Instructions.