Amazone UF 1002, Руководство по эксплуатации

Страница: 200 / 232

Cleaning, maintenance and repairs
200 UF02 BAG00225.3 09.22
14.9 Pump
WARNING
Risks due to accidental contact with spray liquid!
Clean the implement with flushing water before you remove the
spraying pump or other components that come into contact with
spray agent or spray liquid.
14.9.1 Checking the oil level

Only use 20W30 branded oil or 15W40 multi purpose oil.

Ensure the correct oil level. Damage may be caused both by the
oil level being too low or too high.

Foam generation and cloudy oil are signs of a faulty pump mem-
brane.
Do not run a defective pump.
1. Check whether the oil level is visible at the
mark with the pump not running and stand-
ing on a flat surface.
2. Check whether the oil is clear.
3. If the oil level is not visible at the mark, re-
move the lid and top up with oil.
14.9.2 Changing the oil

Change the oil every 400 to 450 operating hours, or at least
once every year.

After a few operating hours, check the oil level; top up if neces-
sary.
1. Remove the pump.
2. Remove the lid.
3 Drain the oil.
3.1 Turn the pump on its head.
3.2 Rotate the drive shaft by hand until the used oil has all run
out.
The option also exists to drain the oil from the drain plug.
However, with this procedure a slight oil residue remains in
the pump; we therefore recommend the first approach.
4. Place the pump on an even surface.