Amazone UF 1002, Руководство по эксплуатации

Страница: 119 / 232

Commissioning
UF02 BAG00225.3 09.22 119
7.2.1.7 Table
Actual value according to
calculation Permissible value ac-
cording to tractor op-
erating manual Double the permis-
sible load capacity
(two tyres)
Minimum ballast front /
rear
/ kg -- --
Total weight kg  kg --
Front axle load kg

kg

kg
Rear axle load kg

kg

kg

You can find the permissible values for the total tractor weight,
axle loads and load capacities in the tractor registration papers.

The actually calculated values must be less than or equal to (

)
the permissible values.
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through insufficient stability of the tractor and insufficient trac-
tor steering capability and braking power.
It is forbidden to couple the machine to the tractor used as the basis
for calculation, if

one of the actual, calculated values is greater than the permissi-
ble value.

there is no front ballast (if required) attached to the tractor for the
minimum front ballast (G
V min
).

Ballast your tractor with weights at the front or rear if the tractor
axle load is exceeded on only one axle.

Special cases:

If you do not achieve the minimum ballast at the front
(G
V min
) from the weight of the front-mounted machine (G
V
),
you must use ballast weights in addition to the front-
mounted machine.

If you do not achieve the minimum ballast at the rear
(G
H min
) from the weight of the rear-mounted machine (G
H
),
you must use ballast weights in addition to the rear-
mounted machine.