Amazone UF 1002, Руководство по эксплуатации

Страница: 170 / 232

Cleaning the implement after operation
170 UF02 BAG00225.3 09.22
12.2 Intensive cleaning of the empty field sprayer
1. Run the pump.
Control terminal, Cleaning menu:
QUICK CLEANING
The following conditions must be fulfilled:
2. The conditions must be fulfilled. Compare
the setpoints and actual values.
3 . > Start the intensive cleaning.
4. Enter the quantity of flushing water required
for cleaning.

Agitators are flushed, tank internal cleaning
is switched on.
Implements with DUS: the spray line is
cleaned.
5. > Confirm and start driving at the same time

Cleaning water is sprayed out.
Spraying is switched on and off several
times.
If necessary, also switch the boundary noz-
zles.
During the intensive cleaning:

Spraying out the cleaning water three times
while driving on the field.
The intensive cleaning procedure takes
about 12 minutes.
6. Drain the final residual quantity.
7. Clean the suction filter and pressure filter.
8. If necessary, clean the nozzle filter and line
filter in the boom.