Amazone Tyrok 400, Оригинальное руководство по эксплуатации

Страница: 4 / 108

6.1.5 Configuring the operating hours
counter
45
6.2 Coupling the implement 46
6.2.1 Removing the safety device against
unauthorised use
46
6.2.2 Couple the headstock 46
6.2.3 Coupling the lower link 47
6.2.4 Coupling the top link 47
6.2.5 Lift parking supports 49
6.2.6 Coupling the hydraulic hose lines 49
6.2.7 Coupling the power supply 51
6.2.8 Swivelling the plough body into
transport position
51
6.2.9 Installing the rear lighting 52
6.3 Preparing the implement for
operation
52
6.3.1 Manual adjustment of the working
width of the plough bodies
52
6.3.2 Adjusting the tilt angle of the plough
relative to the tractor
54
6.3.3 Manual adjustment of the plough
body working depth
55
6.3.4 Hydraulic adjustment of the plough
body working depth
56
6.3.5 Preparing the disc coulter for
operation
58
6.3.6 Preparing the skimmers for operation 59
6.3.7 Setting the tripping force for the
central overload safety
61
6.3.8 Adjusting the tripping force of the
decentralised overload safety
62
6.3.9 Adjusting traction assistance 63
6.3.10 Adjusting the packer arm with
packer catch hooks
65
6.4 Preparing the machine for road
travel
66
6.4.1 Checking the pre-tension of the
overload safety
66
6.4.2 Moving the packer arm into
transport position
66
6.4.3 Swivelling the plough body into
transport position
67
6.4.4 Installing the rear lighting 68
6.4.5 Move front identification into
transport position
69
7 Using the implement 70
7.1 Removing the rear lighting 70
7.2 Bring front identification into
parking position
70
7.3 Moving the plough bodies into
working position
71
7.4 Bring packer arm into working
position
72
7.5 Hydraulic adjustment of the
plough body working width
72
7.6 Adjusting the front furrow width 73
7.7 Using the implement 73
7.8 Turning on the headlands 74
8 Eliminating faults 75
9 Parking the implement 77
9.1 Removing the rear lighting 77
9.2 Bring front identification into
parking position
77
9.3 Lower parking supports 78
9.4 Parking the implement on the
plough bodies
78
9.5 Uncoupling the implement 80
9.6 Uncoupling the power supply 80
9.7 Disconnecting the hydraulic
hose lines
81
9.8 Putting on the safety device
against unauthorised use
82
10 Repairing the machine 83
10.1 Maintaining the machine 83
10.1.1 Maintenance schedule 83
10.1.2 Checking the hydraulic hose lines 84
10.1.3 Checking the condition of wear parts 85
10.1.4 Checking the bolted connections 86
10.1.5 Check the bolts on the headstock 87
10.1.6 Checking the wheels 87
TABLE OF CONTENTS
MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE II