Amazone Tyrok 400 Скачать руководство пользователя страница 80

Страница: 80 / 108

Lower the implement via tractor lower link and
align horizontally via the 3-point hitch.

Correct the settings.

IMPORTANT

Risk of damage to the skimmer

Do not use the skimmer when driving in
curves.
Do not use the skimmer on stony soils.

7.8 Turning on the headlands

The turning radius can be reduced on headlands
through optimal cornering.

When turning, the running gear of the plough is also
steered. To do this, use the "green" tractor control
unit.

First, lift the front plough body via the tractor
lower link.

To completely lift the implement via the running
gear,

Actuate the "blue" tractor control unit.

To turn the plough bodies,

Actuate the "green" tractor control unit.

Move implement into the furrow.

First, lower the front plough body via the tractor
lower link.

To completely lower the implement via the
running gear,

Actuate the "blue" tractor control unit.

Bring the tractor control unit "blue" into float
position.

To align the frame horizontally to the ground,

Lower the implement using the tractor's lower
links.

CMS-T-00007285-A.1

7 | Using the implement

Turning on the headlands

MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE

Содержание Tyrok 400













































































































Результаты поиска

Содержание Tyrok 400

Отзывы:

Бренды по названию

Популярные бренды

Amazone Tyrok 400, Оригинальное руководство по эксплуатации

Результаты поиска

Содержание Tyrok 400

Отзывы:

Бренды по названию

Популярные бренды