Amazone Tyrok 400, Оригинальное руководство по эксплуатации

Страница: 49 / 108

6.1.2 Preparing the tractor
For optimum work results, prepare the tractor for
plough operation.
1. Select a tractor where the track width
3
at the
front and rear differs by no more than 10 cm.
2. Mounted plough: select a tractor on which the
lateral play of the lower links
2
can be set to at
least 8 cm.
3. Select a tractor on which the lower links run apart
in a V-shape when the plough is mounted.
4. Adjust the tyre inflation pressure of the front
wheels equally on both sides.
5. Adjust the tyre inflation pressure of the rear
wheels equally on both sides.
NOTE
The required tyre load capacity must be ensured.
6. Adjust the lifting struts
1
to the same length.
7. Switch off the front axle suspension if possible.
3
2
2
1
1
CMS-I-00006537
6.1.3 Removing the protective varnish
Before initial operation of the implement, remove
the protective varnish from the plough bodies.
CMS-I-00003763
CMS-T-00009557-A.1
CMS-T-00005238-A.1
6 | Preparing the machine
Preparing for initial operation
MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE 43