6
3
Grasp the bucket handle and pull the bucket out toward you.
4
Gently lower the cleaner (by its handle) until it is resting on
the floor.
5
Take the hose out of the bucket.
6
Once again, lift the cleaner by its handle, so that it is again
leaning forward.
7
While still lifting the cleaner, grasp the bucket by the handle
and roll it back into place under the cleaner. Be sure to posi-
tion it correctly, with the bucket handle facing you.
8
Gently lower the cleaner so that its tank area fits correctly
onto the bucket.
9
Pull the two clamps (on the cleaner) over the clamp hooks on
the bucket. Fasten the clamps to lock the bucket in place.
The pipes and the intake port are packaged in a separate
cardboard box within the cleaner package. Remove them
from the box when you are ready to install them.
●
Mounting the Accessories
1
Fasten the floor-brush assembly to Pipe B using the screws.
2
Connect up the hose.
Attach the hose to the intake port. Attach so that the rubber
collar on the hose fits over the stopper on the intake port.
Attach the other end of the host to the pipe. Again, make sure
that the rubber collar on the hose fits over the stopper on the
pipe.
Содержание Cleam Mac V-Sigma
Страница 37: ...33 Unit mm External Dimensions...