Amano Cleam Mac V-Sigma, Руководство по эксплуатации

Страница: 18 / 40

14
■
If the Blower Fails to Start
The phase sequence of the three phases is improper if the “Power Lamp” blinks red at 1-second intervals while the blower
motor remains stopped. In this case, you must use the following procedure to correct the problem.
1. Remove the power plug from the outlet.
The plug must be removed to ensure safety.
2. Swap the wiring connections inside the plug.
Remove the plug’s metal fitting, and expose the inside of the
plug as shown. Disconnect any two of the three leads (but not
the green lead, which is the ground) from their terminals, and
reverse the attachments. Retighten the leads securely.
3. Restart the machine.
Reassemble the plug, then insert it into the power outlet.
Press the OPERATION
ON
switch to start the blower mo-
tor. Make sure that the motor starts and the vacuum operates.