![background image](http://html1.mh-extra.com/html/amano/american-sanders-avac12-p/american-sanders-avac12-p_operators-manual_2918237007.webp)
7
SYMBOLS USED ON THE MACHINE
PREPARING THE MACHINE
PREPARING THE MACHINE
HOW TO UNPACK THE MACHINE
INTENDED USE
SAFETY
SERIAL NUMBER PLATE
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the
instructions indicated for the safety of the operator and the device.
Covered place symbol:
the operations preceded by this symbol must always be carried out in a dry,
covered area.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the machine.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental
regulations in force in the place where the machine is being used.
Open book symbol with an "i":
Indicates the need to consult the instruction manual.
The descriptions contained in this document are not binding. The company
therefore reserves the right to make any modifications at any time to elements,
details, or accessory supply, as considered necessary for reasons of improvement
or manufacturing/commercial requirements. The reproduction, even partial, of the
text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply
modifications. The images are shown as reference only and are not binding as to
the actual design and/or equipment.
Open book symbol:
Tells the operator to read the manual before using the machine.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk
of serious injury to his hands from sharp objects.
SYMBOLS USED IN THE MANUAL
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
PURPOSE AND CONTENT OF THE MANUAL
TARGET GROUP
STORING THE USE AND MAINTENANCE MANUAL
ON CONSIGNMENT OF THE MACHINE
The aim of this manual is to provide customers with all the information needed to use the
machine in the safest, most appropriate and most autonomous way. It includes information
concerning technical aspects, safety, operation, machine downtime, maintenance, spare parts
and scrapping. Operators and qualified technicians must read the instructions in this manual
carefully before carrying out any operation on the machine. If in doubt about the correct
interpretation of instructions, contact your nearest Customer Service Centre to obtain the
necessary clarifications.
This manual is aimed at operators and qualified technicians responsible for machine
maintenance. Operators must not perform operations that should be carried out by qualified
technicians. The manufacturer is not liable for damages resulting from failure to comply with
this veto.
The Use and Maintenance Manual must be stored in its special pouch close to the machine,
protected from liquids and anything else that could compromise its legibility.
When the machine is delivered to the customer, an immediate check must be performed to
ensure all the material mentioned in the shipping documents has been received, in addition to
verifying that the equipment has not been damaged during transportation. If this is the case,
the carrier must ascertain the extent of the damage at once, informing our customer service
office. It is only by prompt action of this type that the missing material can be obtained, and
compensation for damage successfully claimed.
INTRODUCTORY COMMENT
Any type of equipment can only work properly and effectively if used correctly and kept in full
working order by performing the maintenance operations described in the attached documen-
tation. You should therefore read this instruction manual carefully, consulting it again if issues
arise while using the machine. If necessary, remember that our assistance service (organized in
collaboration with our dealers) is always available for advice or direct intervention.
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always give the model, the version
and the serial number (written on the relevant plate).
TECHNICAL DESCRIPTION
The machines of the line are vacuum cleaners which, using the vacuum created inside the
collection drum from the fan driven by the electric motors, are able to vacuum dust and dry solid
bodies, by means of the accessories in contact with the Surface of the floor and furnishings.
The suction pipe pipes the air with dust and solid residues that are retained and collected
through the filters inside the collecting drum. The machine should only be used for this purpose.
This machine is designed and built to be used by a qualified operator to clean (by vacuuming solid,
dry) smooth, compact flooring in the commercial, residential and industrial sectors, in proven safety
conditions.
ATTENTION: the machine is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN to use the machine for picking up dangerous dusts or inflammable liquids
in places with an explosive atmosphere. In addition, it is not suitable as a means of transport
for people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention programme can
be effective without the full cooperation of the person directly responsible for machine operation. The
majority of occupational accidents that happen either in the workplace or whilst moving are caused
by failure to respect the most basic safety rules. An attentive, careful operator is most effective guar-
antee against accidents and is fundamental in order to implement any prevention programme.
The serial number plate is located at the rear of the vacuum cleaner, and indicates the general
characteristics of the machine, in particular the machine's serial number. The serial number is a
very important piece of information and should always be provided together with any request for
assistance or to purchase spare parts.
Main switch symbol:
This is used on the back of the machine to indicate the main switch.
Since the packaging elements (plastic bags, staples, etc.)
are a potential source of danger, they should not be left
within the reach of children, disabled persons, etc.
The overall weight of device, including packaging, is 28 kg
The packaging dimensions are as follows:
The procedure for removing the device from its packaging is the following:
1. Open the outer box.
2. Remove the accessories from the box and carefully lay them on the ground.
3. Take out the vacuum head carton.
4. Remove the machine from the box using the handle, being careful not to damage either during
the operation.
5. Take out the machine from the protective bag using the relative handle, taking care not to damage
either.
N.B.: it is recommended that all the packaging components be kept for any future transporta-
tion of the machine.
CAUTION: users are advised to always wear protective gloves, to avoid the risk of serious
injury to hands.
SAP code:
Serial nr:
Serial nr:
Mod:
V
W
W
Hz
Date:
Made in EEC
A
21.65 IN
B
26.38 IN
C
40.95 IN
Содержание American Sanders AVAC12-P
Страница 1: ...AVAC12 P Operator s Manual...
Страница 30: ...30 Electrical Schematic IG Double Pole Switch CO Capacitor MO Vacuum Motor...
Страница 32: ...32 Vacuum Motor Cover Assembly...
Страница 35: ...35 Hose Assembly Item Ref No Description Qty 1 TMB417735 HOSE 1 2 TMB400999 TUBE 1 3 TMB449357 MALE COUPLING 1...