Amano American Sanders AVAC12-P, Руководство оператора, Страница: 10 / 40

10
TROUBLESHOOTING
This chapter lists the most common problems linked with the use of the machine. If you are
unable to resolve the problems with the information given here, please contact your nearest
assistance centre.
PROBLEM POSSIBLE CAUSE SOLUTION
THE MACHINE
DOES NOT SWITCH ON
The main switch is not activated. Press the main switch.
The plug on the machine's power cable has not been correctly inserted into the mains
socket.
Connect the plug on the machine's power cable to the mains socket.
The electrical specifications of the machine do not match the electrical specifications
of the power supply network.
Check that the technical data on the machine's serial number plate match the data of
the mains supply.
The power cable is damaged. Contact a specialised technician immediately.
INSUFFICIENT
VACUUM -
EXCESSIVE DUST
PRODUCTION
The vacuum hose is not connected correctly to the nozzle on the collection tank. Connect the vacuum hose correctly to the nozzle on the collection tank.
The vacuum hose is not connected correctly to the extension hose. Connect the vacuum hose correctly to the extension hose.
The extension hose is not connected correctly to the vacuum accessory being used. Connect the extension tube correctly to the vacuum accessory being used.
The vacuum circuit is blocked (vacuum hose; extension hose; vacuum accessory). Remove the obstruction in the vacuum circuit.
There is a blockage in the vacuum filters. Clear the obstruction in the vacuum filters.
DISPOSAL
To dispose of the machine, take it to a demolition centre or an authorised
collection centre.
Before scrapping the machine, it is necessary to remove and separate out the
following materials, then send them to the appropriate collection centres in
accordance with applicable environmental hygiene regulations:
• Electric and electronic parts*
• Plastic parts (tanks and handlebars)
• Metal parts (levers and frame)
(*) In particular, contact your distributor when scrapping electric and electronic
parts.
TECHNICAL DATA U.M AVAC12
Electrical vacuum motor (voltage - frequency)
V
Hz
120
50-60
Number of vacuum motor 1
Vacuum motor rated power W 1200
Type of vacuum motor Double stage
Air flow rate
CFM
m
3
/h
131
224
Suction vacuum
inH
2
O
kPa
88.4
22
Total capacity of collection tank
GAL
L
12
46
Collection tank material Polyethylene
Length of power supply cable
FT
M
50
15
Weight of the machine (without accessories)
LB
Kg
30.2
13,7
Machine dimensions (lxpxh)
IN
CM
18x18x35.2
46X46X91
Sound pressure level (ISO 11201) dB(A) 70
Protection rating IP X4
Hose length
FT
M
25
7,5
Hose diameter IN
MM
1.5
40