120 Volt 60 Hz 15 amp Fuse or Circuit Breaker. Individual
branch circuit serving only the washer is recommended. The
washer is equipped with a power cord.
Appliance is equipped with a power cord having a 3-prong
grounding plug for use in a properly installed and grounded outlet.
ADDITIONAL GROUNDING CONNECTIONS
High-Efficiency Washer
Important To Installer
• FOR YOUR SAFETY AND THE PROPER OPERATION OF YOUR NEW WASHER, THE WASHER
MUST BE INSTALLED IN ACCORDANCE WITH ALL THE INSTALLATION REQUIREMENTS.
REQUIREMENTS
C A U T I O N
NEVER USE AN EXTENSION CORD.
• PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING TO INSTALL THE WASHING
MACHINE. THESE INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE.
• REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD
SUFFOCATING.
C A U T I O N
ELECTRICAL GROUND IS REQUIRED ON THIS
APPLIANCE.
C A U T I O N
NEVER CONNECT GROUND WIRE TO PLASTIC
PLUMBING LINES, GAS LINES OR HOT WATER
PIPES.
A grounding kit (Part No. 12001875) is available. It contains the
ground wire, clamp, ground screw and washer. Connect the
ground wire to the back of the unit with the cabinet ground
screw and washer in the hole designated “ground screw.”
Secure the other end to a grounded, metal, COLD water pipe.
ELECTRICAL
GROUNDING
W A R N I N G
•Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified
electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug
provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
• To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in
accordance with the National Electrical Code ANSI/NFPA, No. 70-Latest Revision and local codes and ordinances. It is the
personal responsibility and obligation of the appliance owner to provide adequate electrical service for this appliance
.
Instructions