Amada Miyachi Unitek STA-100A, Руководство по эксплуатации, Страница: 50 / 154

CHAPTER 4: OPERATING INSTRUCTIONS
STA SERIES AC CONTROLS
4-2 990-351
Section II: Preparing for Operation
Turning the Equipment ON
Depending on the customer's purchase, the
Control may have an internal circuit breaker or
power may be applied from the junction box that
feeds power to the Control.
When power is first applied, the system performs
an internal self-test. At the completion of that
test, all LEDs are turned on briefly and
introductory screens appear on the Control Panel
for several seconds, beginning with the screen on
the right.
Control Panel with Introductory
Screen and Indicators
During the power-up cycle, the Control will
briefly display the version of the software
installed in the Control. If you ever need to
contact Amada Miyachi America for technical
assistance, Customer Support will need to know
which version (“Release”) number of the
software is installed.
STA SERIES RESISTANCE WELDING SYSTEM
AMADA MIYACHI AMERICA
MONROVIA, CALIFORNIA
COPYRIGHT 2014, ALL RIGHTS RESERVED
RELEASE 3.0 Rev G
The Control will then display which Option
cards are installed in the Control as shown on the
right.
If an unknown card is present, the system will
stop, prevent further operation, and display the
following message:
*** INSTALLED BOARDS ***
DETECTED SINGLE CASCADE CARD
DETECTED SINGLE COMMUNICATION CARD
DETECTED SINGLE VOLTAGE CARD
DETECTED PRESSURE MONITOR CARD
ERROR! DETECTED UNKNOWN OPTION CARD
After the startup screens, the
Schedule
screen appears. All values on the screen will be the values on the
Control at time of last power-off.