Amada Miyachi Unitek STA-100A, Руководство по эксплуатации, Страница: 141 / 154

STA SERIES AC CONTROLS
990-351 L-1
APPENDIX L
DEFAULT INITIALIZATIONS
The Table below lists the settings that are initially loaded into the Control software. Note that some of
these settings may not still be so set when you receive your equipment. During final testing in our
Quality Assurance department certain settings, such as
Control Mode
, may be altered to test the
equipment with the options you have ordered.
NOTE: Selecting
SET DEFAULTS
in the
Extended System Wide Values
screen, will set all settings to
those shown in table E-1. This may require you to reset certain settings, such as
Control Mode
, to allow
the Control to operate as you ordered it.
Default Initializations
Setting Name
Screen Indication
(May vary between screens)
Default
Current Schedule Number SCHEDULE # 00
Linking All schedules are unlinked
SCHEDULE Initialization
Squeeze Delay Time SQD 0
Squeeze Time SQZ 0
UP 1 Time UP1 0
Weld 1 Time W1 1
Down 1 Time DN1 0
Cool Time CO 0
Up 2 Time UP2 0
Weld 2 Time W2 1
Down 2 Time DN2 0
Hold Time HLD 0
OFF Time OFF 0
Weld 1 Current 00.0
Weld 2 Current 00.0
Weld Valve ELECTRODE VALVE 01
SCR Number SCR # 1
Impulse IMPULSE 01
Detailed Schedule Screen Detailed