Amada Miyachi Unitek STA-100A, Руководство по эксплуатации, Страница: 131 / 154

APPENDIX J: COMMUNICATION OPTION
STA SERIES AC CONTROLS
990-351 J-15
Major Error Bit Pattern – the following bits are set to 1 when their associated error condition exists.
Bit 0
Emergency Stop
Bit 1 Over temperature
Bit 2 No current
Bit 3 Mode change error
Bit 4 Shorted SCR
Bit 5 Weld 1 current high
Bit 6 Weld 2 current high
Bit 7 Weld 1 conduction angle high
Bit 8 Weld 2 conduction angle high
Bit 9 Step end reached
Bit 10 Full conduction angle reached
Bit 11 Schedule number error
Minor Error Bit Pattern - the following bits are set to 1 when their associated error condition exists.
Bit 0
Weld 1 current low
Bit 1 Weld 2 current low
Bit 2 Step count too high
Bit 3 Setup error
Bit 4 Weld end reached
Bit 6 Low line voltage
Bit 7 High line voltage
Bit 8 Current scaling incorrect
Bit 9 Initial force too high
Bit 10 Initial force too low
Bit 11 Final force too high
Bit 12 Final force too low
Active Screen Number
1.
Run screen
2. Stepper screen
3. Weld mode screen
4. % heat monitor screen
5. Valve screen for 12 valves
6. Not used
7. Program screen for constant current modes
8. System values screen
9. Linked schedules screen
10. Not used
11. Not used