Amada Miyachi Unitek STA-100A, Руководство по эксплуатации, Страница: 132 / 154

APPENDIX J: COMMUNICATION OPTION
STA SERIES AC CONTROLS
J-16 990-351
Active Screen Number (Continued)
12.
Duplicate starting schedules in link lists screen
13. Schedule programming screen
14. Not used
15. Hidden screen
16. Copy schedule screen
17. System valve screen – 4 valve option
18. System valve screen – 12 valve option
19. Full current error screen
20. Weld 1 current greater than full current error screen
21. Weld 2 current greater than full current error screen
22. Weld 1 current less than 20% of full current screen
23. Weld 2 current less than 20% of full current screen
24. Weld monitor screen – constant current modes
25. Valve screen – 4 valves
26. Weld monitor programming screen
27. Weld 1 current plus stepper value exceeds full current screen
28. Weld 2 current plus stepper value exceeds full current screen
29. Emergency Stop screen
30. Thermostat over temperature screen
31. No current error screen
32. Full wave conduction angles reached error screen
33. Mode change error screen
34. Weld 1 current too high
35. Weld 2 current too high
36. Weld 1 current too low
37. Weld 2 current too low
38. Weld 1 conduction angle too high
39. Weld 2 conduction angle too high
40. Step count too high error screen
41. Modified schedule not saved error screen
42. Duplicate SCR number assigned error screen
43. Weld count reached limit error screen
44. Stepper end reached error screen
45. Not used
46. Simplified schedule screen
47. Simple %heat screen
48. Not used
49. Seam weld in primary current control screen
50. Seam weld in %heat mode screen