Supervisor 2000 Installation Instructions
PUD1601R6-1
For Assistance: [email protected] +1 (909) 591-8431
Page 5
Introduction
This manual covers the physical installation process for SU2000 Optical Turnstiles. A separate
SU2000 User Guide
provides
operating instructions and additional information such as configuring turnstiles for bi-directional passage applications and monitoring
outputs. It is highly recommended that both this manual and the
SU2000 User Guide
be read in their entirety prior to beginning
installation.
There are three types of SU2000 cabinets used to create passage lanes: a master cabinet, a slave cabinet, and a center
(expansion) cabinet. A single passage lane consists of a master cabinet and a slave cabinet [Figure 1]. The center cabinet is used
to create additional passage lanes with the addition of a single cabinet [Figure 2].
Each cabinet has an unsecured and secured side. Alvarado follows what we call the “right-hand rule." User status lights and card
readers are always installed on the right-hand side in the entry and exit directions.
SU2000 Cabinets
The master cabinet contains the main turnstile
controller, I/O control board, power supply, sensor
receivers, and a power button located at the base on
the secured side.
The reveal of the master cabinet contains a user status
display that communicates lane status to the user.
Center cabinets contain both master and slave
components. Center cabinets are extension cabinets
used in multi-lane applications.
The center cabinet contains the main turnstile
controller, I/O control board, power supply, sensors for
both the master and slave side of the center cabinet,
and a power button located at the base on the secured
side.
The reveal of the center cabinet contains two user
status displays that communicate lane status to the
user.
The slave cabinet contains sensor transmitters.
The reveal of the slave cabinet contains a user status
display that communicates lane status to the user.
Master Cabinet
Center Cabinet (Multi-Lane Configuration)
Slave Cabinet
Secured Side
Secured Side
Unsecured Side
Unsecured Side
Slave
Cabinet
Center
Cabinet
Slave
Cabinet
Master
Cabinet
Master
Cabinet
Power
Button
Power
Button
Power
Button
Single-Lane Configuration
Figure 1
Multi-Lane Configuration
Figure 2
