Supervisor 2000 Installation Instructions
PUD1601R6-1
For Assistance: [email protected] +1 (909) 591-8431
Page 29
Testing Ethernet Communication (Optional)
Required Items:
•
CAT5/6 Ethernet Cable
•
Laptop Computer Running Windows 7 or Windows 8
1. Locate the Ethernet port on the CPU board [Figure 29].
2. Connect the Ethernet cable to the Ethernet port.
3. Connect the other end of the Ethernet cable to the laptop
computer.
4. Launch
Command Prompt
on the computer by
typing
CMD
in the '
Search programs and files
' field.
5. Enter the following command:
ping XXX.XXX.X.XXX,
where XXX.XXX.X.XXX is the IP address of the
turnstile [Figure 30].
6. A successful ping will result in the message shown in
[Figure 30]:
The following procedure is applicable to non-networked (standalone) turnstiles. For instructions on testing Ethernet communication
over a facility network, please refer to the
SU2000 User Guide
.
192.168.0.100 is the default IP address configured by Alvarado.
If the turnstile has been assigned a different network IP
address, ping that IP address instead. Contact your system
administrator for network information.
NOTE
NOTE
Ethernet
Port
CPU Board
Figure 29
Ping Results
Figure 30
