Supervisor 2000 Installation Instructions
Page 14
For Assistance: [email protected] +1 (909) 591-8431 PUD1601R6-1
Turnstile Layout
With the panels and lids removed, confirm that the cabinets are laid out such that one side of the lane contains the master controller
cabinet components and the other side of the lane contains the slave cabinet components. The correct layout orients the power
button on the secured side as shown in [Figure 11]. An example of an incorrect layout is shown in [Figure 12]. Before proceeding,
verify the master controller cabinet components are facing the slave cabinet components, and the power button(s) are located on
the secured side. The Lane 1 master cabinet is always the right-most cabinet in relation to the unsecured side.
The power button should always be located on the secured side.
Unsecured Side
Unsecured Side
Secured Side
Secured Side
INCORRECT
CORRECT
Power
Button
Power
Button
Power
Button
LANE 1
LANE 1
LANE 2
LANE 2
Power
Button
Slave Controller Side
Slave Controller Side
Slave Controller Side
Slave Controller Side
Master Controller Side
Master Controller Side
Master Controller Side
Master Controller Side
Correct Turnstile Layout
Figure 11
Incorrect Turnstile Layout (Lanes Oriented Backwards)
Figure 12
