Alutech LG-500, Руководство по сборке и эксплуатации

Страница: 78 / 82

ПРИВОД LG-500 | LG-500 DRIVE)
76
STORAGE, TRANSPORTATION AND DISPOSAL
FAULT POSSIBLE REASON RECOMMENDATIONS
Door does not stop in final
positions
Final positions have changed
due to abnormal situation
When an obstacle is found, the drive
will independently specify the final
positions during next opening based
on the support, installed on the rail
Drive does not react to obstacles
on the optical axis of photocells
during door operation
Photocells are
malfunctioning or the
incorrect operating mode of
the photocells is selected
Check the performance of
photocells, replace, if necessary;
check the selected photocells mode
in the menu
The drive stops during opening
and performs independent
reverse movement when
closing; the indicator shows
error number ‘ E1 ’
Obstacle, resulting in force
(power consumption) excess,
is found
Make sure that there are no obstacles
and check the correct operation
of the door (absence of ‘jamming’
during operation; correct balance
etc.). Contact a qualified specialist or
service provider
The drive stops during opening
and completes independent
reverse movement when
closing; the indicator shows
error number ‘
E2
’
Photocells are activated
Check the performance of photocells,
replace, if necessary; check the
selected photocells mode in the
menu
The drive performs independent
reverse movement when
closing; the indicator shows
error number ‘ E3 ’
Optical sensors of safety
margin are activated
Check the performance of the safety
margin, replace the failing compo-
nents, if necessary; check the selected
safety margin mode in the menu
The drive does not start
working, when command is
given; the indicator shows error
number ‘
E4
’
Error occurred during
phototest
Check the performance of photocells,
replace, if necessary; check the
selected photocells mode in the
menu
The drive does not start working
or spontaneously stops, when
command is given; the indicator
shows error number ‘ E5 ’
Tripping occurs based on the
signal on input STOP
Check the working condition of the
safety elements, connected to the
STOP input (or crossover presence),
replace them, if necessary
Error number ‘
E8
’ is shown on
the indicator when the final
positions are being set
Either support is not installed
on the rail, or the support is
installed at a larger distance
from the
OPEN
position, than
required
Set the support at a distance ~ 20 mm
from the
OPEN
position and repeat
the final positions adjustment
procedure
After the control command is
given, the drive light flashes
An error occurs in the
operation of the drive
When the backlight blinks, check the
error display on the drive display.
Repair the drive according to the
error description
10. STORAGE, TRANSPORTATION AND DISPOSAL
The product shall be stored in its packaging in closed dry spaces. Do not expose to atmospheric
precipitation or direct sunlight. Shelf-life is 3 years from the manufacture date. Transportation
can be performed using all types of covered ground vehicles, with measures to prevent shock
and movement inside the vehicle.
Disposal of the product shall comply with the regulatory and legal requirements on
recycling and disposal, valid in the user’s country. The product does not contain sub-
stances, posing danger to life and health of people, and environment.