9
Side Assembly
4
Before you place any of the
panels remember to
remove the transit blocks
from the bottom of the
panels (diagram 12), once
removed be careful not to
damage the cladding.
Position the first panel
onto the base (diagram 13).
Its best to start at the rear
of the building with the
large plain panel.
You can then offer up the
next panel adjacent to it.
The rear panel meets the
inside face of the side panel
(diagram 15). Drill pilot
holes and fix together with
four 80mm countersunk
zinc plated screws (02-
1868), diagram 15.
Diagram 11
Diagram 13
Diagram 14
Diagram 15
Dia. 13
Dia. 15
Do
NOT
fix the side panels to the
base at this stage. This is done
later in the assembly process.
Section
Internal
Diagram 12
Sid
e
Rea
r
80m
m
Scr
ew
Содержание EVOLUTION FUSION
Страница 1: ...1 04 18...
