Alton EVOLUTION FUSION, Инструкция по эксплуатации

Страница: 22 / 44

22
Roof Sheet Installation
13
Now install the ply roof sheets, start by fitting the two sheets (AB0632) next to the gable ends
(diagram 51). Make sure the top edge of the roof sheet is flush with the ridge plate and the end of
the gable soffit bar (diagram 53). This will give you a slight overhang at the eaves (diagram 52). The
outside edge should be flush with the outer edge of the gable soffit, if the ply sheets do not sit
square on your roof this is because the building is not true, try pushing on the corners of the building
until the roof sheets line up.
Diagram 51
Section
Section
Diagram 52
Diagram 53
AB0589
AB0589
Ply
AB
06
32
AB
063
2 Dia. 53
Dia. 52
FLUSH