Alton EVOLUTION FUSION, Инструкция по эксплуатации

Страница: 4 / 44

4
It is necessary to leave sufficient working room around your building when you're putting it up and
also to allow for maintenance and the possible need to replace a piece of glass in the future. If
possible try and leave a space of 2ft/610mm around the building.
Locate the building where there is maximum amount of sunlight
and avoid if poss i ble any shade
from trees, fences or other buildings. Over-hanging branches can be a particular nuisance and should
be avoided.
Choose a site where the building is relatively easy to get to and convenient to bring water to and
possibly a supply of electricity.
Finally, and most importantly, choose a site where your Alton building will look right so that it will
compliment your garden.
1
SOIL
50mm
5 : 1
3’ X 2’ Slab (2” thick)
(900mm X 600mm)
Recommended
A
B
Slab Base Size (Recommended)
Note: The base should always be larger than your
building.
The measurements given in ‘A’ and ‘B’ should only
be used as a guide.
Building
Width
Building
Length
A (mm) B (mm)
8’9.5” -
2684mm
6’5” - 1977mm 2700 2400
8’9.5” -
2684mm
8’6” - 2606mm 2700 3000
8’9.5” -
2684mm
10’7” -
3236mm
2700 3600
8’9.5” -
2684mm
12’8” -
3866mm
2700 4200
Base Preparation