Alto Neptune 5, Руководство по обслуживанию, Страница: 4 / 61

Neptune_GB_Ver.2.0_10/03
1.
Safety instructions
Safety instructions
For your own safety
Observe valid safety regulations
for electrical equipment.In
particular, observe the following
regulations:
lEC 60335-2-69
EN 60335 -2-69
Additionally:
Also see national regulations.
Before using the cleaner, always
read the operating instructions
and keep them readily available.
Only allow the high pressure
cleaner to be used by persons
who have been trained in its use
and who have been explicitly
authorized to use it.
Repair work should be
carried out by persons
instructed in electrical
installations or by trained
electricians only.
ESD measures
(electrostatic discharge) Take the following ESD precautions before carrying out any repairs to
the electronics:
• Touch the earth conductor before repairing the cleaner (to discharge
electrostatic charge from your body).
• Wear wrist band if necessary.
• Use a conductive floor covering or a conductive table cover.
• Never touch the printed circuit board or electronic components (always
hold at plastic).
• Transport electronic components in conductive packaging (e.g. ESD
bag).
2.